PTFE high-temperature net belt for eva pvb sgp lamination vacuuming

PTFE high-temperature net belt

Fiberglass fabric coated with PTFE is made up of high-capability fiberglass which has steeped into PTFE. It is a new product with Main capability and characteristics:

1). It can be used under the temperature of -196°C to 300°C, which has the capability of weather resistant and age resistant. Under practical situation of high temperature of 250°C for 200 days, not only the intensity will not decrease, the weight will not reduce; if put it under the high temperature of 350 °C for 120 hours, the weight only decreased by about 0.6%; under the situation of -180 °C, it will not chap and keep the original pliability;

2). Hardly to adhere any material; it is easy to wash away the blot or other dust such as resin, coating material, etc.

3). Chemical corrosion resistant, it could resist acid, alkali, aqua fortis and various kinds of organic liquid corrosion;

4). Good dimension stability (the ratio of extending is lower than 0.5%), High intensity, good mechanical capability;

5). Resisting impotence caused by bend, and it could be used on smaller tread;

6). Capability of medicament resistant and non-poison, almost to resisting all kinds of medicament;

7). Fireproofing and flame resisting.

8). Capability of breathe freely, the rate of breathe of conveyer belt which reduce the consuming of heat and increase the efficiency of drying.

thickness: 0.2-1.2mm

width: 300-4200mm

mesh size: 1-10mm, square(4×4mm, 1×1mm, etc.)

color:  coffee, black

We could provide “PTFE mesh fabric”.

SAFETY GLAZING VACUUMING MESH

HIGH TEMP CONVEYOR BELT MESH

Peter Lin, [email protected],

[email protected]

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com

PTFE high-temperature net belt for eva pvb sgp lamination vacuuming

PTFE high-temperature net belt

Fiberglass fabric coated with PTFE is made up of high-capability fiberglass which has steeped into PTFE. It is a new product with Main capability and characteristics:

1). It can be used under the temperature of -196°C to 300°C, which has the capability of weather resistant and age resistant. Under practical situation of high temperature of 250°C for 200 days, not only the intensity will not decrease, the weight will not reduce; if put it under the high temperature of 350 °C for 120 hours, the weight only decreased by about 0.6%; under the situation of -180 °C, it will not chap and keep the original pliability;

2). Hardly to adhere any material; it is easy to wash away the blot or other dust such as resin, coating material, etc.

3). Chemical corrosion resistant, it could resist acid, alkali, aqua fortis and various kinds of organic liquid corrosion;

4). Good dimension stability (the ratio of extending is lower than 0.5%), High intensity, good mechanical capability;

5). Resisting impotence caused by bend, and it could be used on smaller tread;

6). Capability of medicament resistant and non-poison, almost to resisting all kinds of medicament;

7). Fireproofing and flame resisting.

8). Capability of breathe freely, the rate of breathe of conveyer belt which reduce the consuming of heat and increase the efficiency of drying.

thickness: 0.2-1.2mm

width: 300-4200mm

mesh size: 1-10mm, square(4×4mm, 1×1mm, etc.)

color:  coffee, black

We could provide “PTFE mesh fabric”.

SAFETY GLAZING VACUUMING MESH

HIGH TEMP CONVEYOR BELT MESH

Peter Lin, [email protected],

[email protected]

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www.cncglass.com  www.cnceva.com