Skip to content

CNC glass interlayer-EVA FILM

cnc@cncGlass.com

EVA SUPER CLEAR
EVA MILKY WHITE
GREEN MASKING TAPE
CUTTER FOR CLEANING LAMINATE EGDES
More…

Month: August 2015

Posted on August 31, 2015

GLASS GREEN TAPE

Posted on August 28, 2015January 6, 2016

BACK TO HOME PAGE

BACK TO HOME PAGE

Posted on August 25, 2015

EVA FILM SAMPLES

Posts navigation

Page 1 Page 2 Next page

Products

EVA SUPER CLEAR
EVA MILKY WHITE
GREEN MASKING TAPE
CUTTER FOR CLEANING LAMINATE EGDES
More…

Peter Lin
Mail: cnc@cncGlass.com
cnc@cncEva.com
Whatsapp: 0086 15013829504

Super clear eva film
Outdoor white eva film series
Green tape for laminating, heating resistant
Thermal cutter trimming eva glass edges
www.cncGlass.com
www.cncEva.com

Links

Home
CNCglass on Youtube
CNCglass on Linkedin
Peter on Linkedin
www.CNCnext.com
CNCglass on Google Plus
Peter on Google Plus

Search for:

News

(no title) October 19, 2018
Edges Cleaning hot knife for SGP PVB laminated safety glass Hand operated tool for cutting small quantities, for short-time operation only. To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric. Fitted with cutting foot, the combined tool is especially effective for cutting synthetic fabric without cutting surface. Controlling heating by switching the toll on and off Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 Hot Knife Electric Rope Cutter Cautions Always operate the Hot Knife in well ventilated space. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped. Only operate Hot Knife when it is in contact with the insulation board Keep hot blades away from skin, clothing and other flammable materials. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again. October 18, 2018
(no title) October 16, 2018
(no title) October 16, 2018
(no title) October 16, 2018
(no title) October 14, 2018
Green polyester tape is ideal for SGP PVB EVA laminated glass safety glazing edges masking and general powder coating applications; it is the industry standard for polyester tape. Removes cleanly from surfaces without leaving a residue Maximum Temperature: 500 degrees F Total Thickness: 3.5 mils This Polyester Tape has a silicone adhesive and is great for Powder Coating and can also be used for safety glazing edges masking, E-Coating, Plating and Anodizing. It can also be used for applications such as taping off large surfaces, general purpose die cutting, PC board masking. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncglass.com www.cnceva.com October 14, 2018
teflon laminating mesh for EVA PVB SGP interlayer safety glazing vacuuming Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 September 18, 2018
(no title) September 18, 2018
(no title) September 18, 2018
(no title) September 18, 2018
breathing mesh for silicone vacuum bag to improve vacuuming of eva pvb sgp lamination Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 September 11, 2018
c profile silicone tube, c styple silicone tube, c section silicone tube for eva pvb sgp curved glass vacuuming Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 September 7, 2018
c profile silicone tube, c styple silicone tube, c section silicone tube for eva pvb sgp curved glass vacuuming Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com Whatsapp: 0086 15013829504, WeChat: WeCan365 September 7, 2018
(no title) September 7, 2018
(no title) September 7, 2018
(no title) September 7, 2018
(no title) August 21, 2018
Differences between CNC02 and CNC01: *CNC02-Continuously-Working Thermal Cutter is designed for continuously working with air cooling system, while CNC01-Intermittently-Working is only for short time working, you need to release the button intermittenly for cooling after shor-time heating in case itself gets too hot. *CNC02-Continuously-Working is able to trim the edges with minimum of smoke and no burned marks. *CNC02-Continuously-Working is lighter ,only 610kg, easier to hanlde, while CNC01 is 950kg. *CNC02-Continuously-Working is availbe for high point temperature adjustment, 16 sections of temp to set. So you don’t need to let the blades going up to 500C degrees each time you use it, you may only set the lower temperature(for example about 300C degrees) only if it’s high enough for you to trim interlayer remains, so you can prolong the life time of the blades, and save cost. August 21, 2018
(no title) June 25, 2018
TEFLON MESH FOR SILICONE VACUUM BAG BREATHING 1- MAX Width 4000mm*Any length (You decide the size, We can cut exact size as you need.) 2- Helping vacuuming, avoiding congesting valves and clogging vacuuming 3- Protecting the silicone blankets from the sharp glass edges 4- ≥ 260℃ Continuously Heating Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com, Whatsapp: 0086 15013829504, WeChat: WeCan365. June 25, 2018
(no title) June 18, 2018
breathing TELFON MESH FOR SILICONE VACUUM BAG applied in EVA PVB SGP lamination machines 1- MAX Width 4000mm*Any length (You decide the size, We can cut exact size as you need.) 2- Helping vacuuming, avoiding congesting valves and clogging vacuuming 3- Protecting the silicone blankets from the sharp glass edges 4- ≥ 260℃ Continuously Heating Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com, Whatsapp: 0086 15013829504, WeChat: WeCan365. June 18, 2018
(no title) May 30, 2018
(no title) May 23, 2018
(no title) May 23, 2018
(no title) May 23, 2018
(no title) May 23, 2018
(no title) May 23, 2018
(no title) May 14, 2018
Green Polyester Tape Powder Coating High Temp for safet glazing edges masking Withstands Up to 425°F (218°C) for 1 hour Material: Polyester Adhesive Leaves No Residue after Removal High Temperature Polyester Tapes are in stock and ready for fast shipment. Polyester tapes are best for high temperature powder coating applications because polyester tape resists temperatures up to 425F (218C) for 1 hour. Polyester tape is stocked on long mother rolls and can be cut to your specific width and shipped within 1-2 business days upon request. Peter Lin, cnc@cncGlass.com, cnc@cncEVA.com; Whatsapp: 0086 15013829504; WeChat: WeCan365； May 14, 2018
(no title) May 14, 2018
Green polyester film tape- backing with silicone adhesive; Recommended applications: Safety glazing edges holding during combination and masking to prevent EVA PVB SGP overflowing; Splicing of silicone liners, films and papers; Holding parts or vacuum bags during composite bonding operations； Masking metal surfacesin acid or caustic chemicalmilling baths; Flash breaker in metal bonding processes where the excess epoxy (flash) flows on the tape; Protective tape reduces scratches during handling and shipping Paint mask for areas subject to higher temperature bake cycles Peter Lin, cnc@cncGlass.com, Whatsapp: 0086 15013829504, WeChat: Wecan365 May 6, 2018
(no title) May 3, 2018
(no title) May 3, 2018
(no title) April 28, 2018
(no title) April 28, 2018
(no title) April 18, 2018
(no title) April 16, 2018
(no title) April 16, 2018
(no title) April 12, 2018
(no title) April 8, 2018
(no title) April 8, 2018
(no title) April 8, 2018
(no title) April 8, 2018
(no title) March 28, 2018
(no title) March 28, 2018
heating cutter to clean EVA PVB SGP TPU INTERLAYER REMAINS March 28, 2018
high temp tape polyester tape for glass laminated with eva pvb sgp evalayer evasafe evaforce evalam eva visual March 26, 2018
(no title) March 22, 2018

PRODUCTS

EVA SUPER CLEAR
EVA MILKY WHITE
GREEN MASKING TAPE
CUTTER FOR CLEANING LAMINATE EGDES
More…

Search for:

Home
CNCglass on Youtube
CNCglass on Linkedin
Peter on Linkedin
www.CNCnext.com
CNCglass on Google Plus
Peter on Google Plus

Archives

EVA SUPER CLEAR
EVA MILKY WHITE
GREEN MASKING TAPE
CUTTER FOR CLEANING LAMINATE EGDES
More…

Proudly powered by WordPress