Month: November 2014

Comparing Adhesive Strength( Peeling Test) of CNC Glass Interlayer EVA Film: EVAFORCE EXTREME

Adhesive Strength Test( Peeling Test) of A famous international supplier
1-Tester: Peter Lin
2-Test Time: May, 26, 2014.
3-EVA Film Samples: An famous international supplier
4-Speed: 300mm/min
5-Laminating Time and Temperature: 85°-15′130°-40′

No. Max force in section one
(N) Max strength in section one
(N/cm) Max force in section two
(N) Max strength in section two
(N/cm) Max force in section three
(N) Max strength in section three
(N/cm)
1 183.816 36.763 181.708 36.342 169.037 33.807
2 196.339 39.268 183.287 36.657 193.937 38.787
3 222.141 44.428 224.827 44.965 214.442 42.888
Max 222.141 44.428 224.827 44.965 214.442 42.888
Min. 183.816 36.763 181.708 36.342 169.037 33.807
Average 200.765 40.153 196.607 39.321 192.472 38.494
*The EVA film is totally separated from glass under test.

Adhesive Strength Test( Peeling Test) of CNC Glass Interlayer EVA Film: EVAFORCE EXTREME
1-Tester: Peter Lin
2-Test Time: May, 26, 2014.
3-EVA Film Samples: EVAFORCE EXTREME of CNC Glass Interlayer
4-Speed: 300mm/min
5-Laminating Time and Temperature: 85°-15′130°-40′

No. Max force in section one
(N) Max strength in section one
(N/cm) Max force in section two
(N) Max strength in section two
(N/cm) Max force in section three
(N) Max strength in section three
(N/cm)
1 233.496 46.699 194.603 38.921 200.134 40.027
2 301.702 60.340 246.638 49.328 201.988 40.398
3 363.063 72.613 225.514 45.103 209.049 41.810
Max 363.063 72.613 246.638 49.328 209.049 41.810
Min. 233.496 46.699 194.603 38.921 200.134 40.027
Average 299.420 59.884 222.252 44.451 203.724 40.745
*The EVA film is not totally separated from glass under test.

Test Result Conclusion:
Laminating Time and Temp 85℃-15′
130℃-40′ 85℃-15′
130℃-90′ 85℃-15′
140℃-20′ 85℃-15′
140℃-40′
EVAFORCE
EXTREME 48.36 53.18 16.82 40.58
Famous International Supplier 39.32 17.80 9.60 43.65

The test result shows that EVAFORCE EXTREME of CNC Glass Interlayer is better in Adhesive Strength between EVA Film and Glass surface than the famous international supplier.
EVAFORCE EXTREME EVA Interlayer Film lives up to the world-class level.

EVA FILM
EVAFORCE® EXTREME
*Super Clear
*For Architectural Safety Laminated Glass
*Less Overflow When Heating
*Strengthened Mechanical Properties
*Recommended For Extreme Environments, Curved Glass Laminating
*Applied Both Indoor And Outdoor
*Replacing PVB Film

HOW TO SOLVE ADHESIVE STRENGTH OF EVA FILM FOR LAMINATED GLASS

Importance:
The adhesive strength of EVA Film is very important for laminated glass. The adhesion will affect the safety of laminated glass and the delamination of laminated glass.
So, which factors will influence the adhesion of EVA Film:

1.The type of EVA Film
Generally speaking, the super-transparent EVA Film is stronger in adhesion than the normal transparent EVA Film. The outdoor type EVA Film is stronger in adhesion than the indoor type of EVA Film.

2.The manufacturer of the EVA Film
Because different EVA Film manufacturer has different formula of producing EVA Film. So the adhesion of the EVA Film will be different.

3.Heating temperature of the EVA Film
When laminating the EVA Film, the heating temperature will affect the cross link reaction and coupling reaction, which will lead to the adhesive strength of the EVA Film.

4. The Heating Time
The heating time must be long enough for the cross link reaction and coupling reaction to be fulfilled completely.

5.The storage of the EVA Film
If you open the package of the EVA Film, then don’t use up, the left EVA Film may absorb some moisture, which will do harm to the adhesion strength.

CNC Glass Interlayer
www.cncglass.com www.c-n-c.com
[email protected] [email protected]
Product 1]Super Clear EVA Film for safety laminated glass
Product 2]Milky White EVA Film for safety laminated glass
Product 3]Green Tape for fixing pre-laminated glass glazing
Product 4] EVA Thermal Cutter for cleaning EVA film safety laminated glass edges overflowed remains