CNC Glass straight-line edging machine

CnC Glass straight-line edging machine

CnC-E9 General description

CnC-E9 is suitable for processing straight-line edge & 45°arises of glass sheet with various size and thickness.

The main base is made of cast iron.

The glass thicknesses is adjusted by a servomotor and showed on a digital display.

A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually.

Independent felt wheel and the cerium water recirculation system make the flat edge more shining.

Input and output conveyor adopt timing belt which can improve the transmission precision.

It is easy to operate and has good performance.

CnC-E9 Model Explanation

9 Spindles totally: 5 spindles for the straight-line edge (adopt the independent wool felt wheel), 2 pieces of spindle for front and back arris each.

CnC-E9 Operation Condition

Power supply :AC380V±10% 3φ 50HZ±2%

Environment :Temperature : 1~40℃

R.H: 90%

CnC-E9 Technical Data

A. Processing glass thickness: 3-25mm

B. Angle of arris: 45°

C. Min.size of glass: 80mm×80mm

D. Processing speed: 0.5~4.5m/min

E. Installed power :19.08KW;

F. Dimension : 7000×1400×2500mm

CNC EVA Glass Laminating Machine

CnC EVA Glass Laminating Machine

Technical Parameter of EVA Vacuum Glass Laminating Machine

Maximum size of laminating glass: Customize as customers’ need

Layer number of silicone beds: 2 silicone beds

CE Certification

Voltage: 380v-440v

Frequency:50HZ–60HZ

Current:60A

Total wattage≤40KW

Heating wattage:36KW

Winding wattage:2.25KW

Highly efficient and power-saving:it consumes 40degress power to make 5 layers of glass in one furnace every 2-3hours.

Summary of EVA Vacuum Glass Laminating Machine

EVA Vacuum Glass Laminating Machine is a equipment specially designed for manufacturing laminated safety and decoration glass with Ethylene-vinyl acetate EVA Interlayer Film. The EVA Vacuum Glass Laminating Machine uses the silicone vacuum bag to make the
pre-laminated glass is processing in the vacuum condition.It also possible to laminating EVA Interlayer Film with silk、paper、
calligraphy and painting、ultraviolet radiation unilateralism film、swithchalbe film and so on. All kinds of art glass, decorated glass, privacy glass, safety glass and solar panel can be processed in the EVA Vacuum Glass Laminating Machine. Compared to autoclave producing line for Polyvinyl Butyral PVB Interlayer Film, the EVA Vacuum Glass Laminating Machine is much easier to operate and less cost to build., and more flexible and convenient for the designer.

Working Principle

EVA Vacuum Glass Laminating Machine uses silicone vacuum bag to make the pre-laminated glass is cured under vacuum environment.

Function and Characteristic

Oven in the EVA Vacuum Glass Laminating Machine afford horizontally heating to make the heat in average and reduce the waste of heat.

EVA Vacuum Glass Laminating Machine Vacuum bed is made by high quality silicone vacuum bag, which sustain for more 2500 times heating.

EVA Vacuum Glass Laminating Machine Control panel is precisive, one-set complete processing-easy to operate.

The EVA Vacuum Glass Laminating Machine can produce laminated glass with EVA Film, but also you can laminate other decoration interlayers, like smart glass.

Customization is available. The EVA Vacuum Glass Laminating Machine is concisely designed according to customer’s requirement.

EVA Vacuum Glass Laminating Machine save electricity power: produce one batch(5 floors) in 2-3 hours ,consume only 40 kilowatt per hour.